| • | THE SCIENCE (How it works): Sound Bars come in many different configurations. They come in 2, 3, 5, and 7 channel. Some require a subwoofer and some require an AVR receiver. This is true 5 channel surround. The rear speakers are on the end of the bar. The surround delay can be set to enhance the rear channels. The rear sound is bounced off of solid objects for surround effects. This system uses an actual 5.1 surround AVR decoder with 5 separate channels! |
| • | WHY WE USE IT (Out in the Field): This soundbar is perfect for a quick and easy all-in-one solution. There is no complicated cable routing required. It's affordable with great effects! It saves our customers money instead of installing an expensive wired, in-wall or in-ceiling formal surround sound system. |
| • | BASIC FEATURES: Can be used as TRUE 7.1 Surround Sound. Comes with 56 feet of 18 Gauge speaker cable to make 7, 8 feet long cables. |
| • | THE END RESULT: This is a high-end Sound Bar which provide True Surround Sound for anything from music to movies and games. It's very affordable and the sound improvement is great. No mess, no huge wire mess, and this Sound Bar is a quick setup. |
| • | You can try other 2.1 or 3.1 surround systems using synthesized and simulated sound processing but it will never be like the true Dolby Digital and Dolby Pro-logic surround sound delivered by this system! |
| • | SURROUND BAR SPECIFICATIONS: Model FS-7.1 7-Channel |
| • | The Model FS-7.1 Surround Bar Loudspeaker is an integrated high-performance loudspeaker containing all seven channels of speakers in a single elegant, slim enclosure. |
| • | The speaker can be either wall-mounted above or below the video display, or it can be placed on a shelf or attached to a flatscreen wall mount bracket that has the appropriate speaker adapter. |
| • | This speaker uses several advanced technologies to produce convincing 7-channel surround sound from a conventional-looking sound bar. The three 1" soft-dome tweeters deliver the high-frequency content for the three front LCR channels of the home theater system. These tweeters were chosen for their exceptionally flat, accurate response and wide dispersion. |
| • | The two 4 x 6-inch speakers on the front baffle are unique: Each is a dual voice coil driver-the left driver handles the left front channel and "half " of the center channel, while the right driver plays the right front channel and "half " of the center. |
| • | This is a particularly advantageous situation, in that it preserves the tightly-focused LCR "imaging" that is the hallmark of a top-quality home-theater sound system, but saves space and reduces cost by only requiring two drivers instead of three. |
| • | Additionally, the use of 4 x 6-inch drivers minimizes the height of the FS-7.1's cabinet compared to what it would be if 5 ¼" drivers were used while retaining virtually the same radiating area, for strong acoustic output. |
| • | Even greater innovation is at work in the side-firing surround drivers. First, the angle at which the surround drivers fire out into the room has been precisely calculated to produce the greatest sense of surround "envelopment" by the listeners. |
| • | These drivers are also dual voice coil drivers: The two voice coils play the side 5.1 and back 7.1 surround channels, which is then reflected off the side wall and around the listeners' ears. |
| • | By utilizing these unique drivers in an innovative array and taking full advantage of well-known psycho-acoustic effects, the FS-7.1 creates impressive and convincingly three-dimensional theater sound from virtually any movie soundtrack-without the need for expensive on-board electronic processing circuitry and built-in amplifiers! |
| • | Full 7-channel surround sound, with the simplicity of connection to a familiar surround receiver-and no speaker boxes cluttering up the room! |
| • | Remember that the primary goal of a good home theater is not to make you believe that you are in a movie theater; It's to make you believe you're in the movie! |
| • | Frequency Response 75Hz - 20kHz ±3dB. Nominal Impedance 8 Ohms. Crossover Frequency 2.5kHz |
| • | Recommended Amplifier Power: 10 up to 125 Watts RMS Power |
| • | Dimensions: (Width x Height x Deep) 43½ x 5½ x 5¼" or 1105 x 140 x 134mm. Weight (ea) 37lbs; 17kg |
| • | AVR RECEIVER SPECIFICATIONS: Denon AVR-1912, 7.1 Home Theater Receiver |
| • | Receiver offers a 3D experience with exceptional picture and dynamic sound quality. Equipped with the latest inputs and network functions, this robust receiver brings out the best in your Blu-ray/DVD players, game consoles, and other entertainment devices. |
| • | The AVR-1912 boasts an equal amp power design and supports multiple high-resolution audio formats, providing for an absorbing listening experience in surround sound. |
| • | It also supports HDMI 1.4a, allowing you to get the most out of 3D content. |
| • | Enhanced by digital network audio/photo streaming capabilities, including support for AirPlay, mp3/WMA/WAV and FLAC HD audio, and Windows 7 compatibility, the AVR-1912 will satisfy even the most demanding home theater enthusiasts. |
| • | Equal power amp design with seven discrete 90-watt channels. HDMI 1.4a supports 3D video formats and Deep Color/x.v.Color content |
| • | Ethernet, USB, and six HDMI inputs for added connectivity. Supports AirPlay for wireless music streaming from iPhone, iPad, iPod touch, or iTunes |
| • | Audyssey MultEQ, GUI overlay, and remote control make setup and operation easy. Backed by a two-year warranty |
| • | Weight: In Pounds: 22.4, (Width-Height-Depth): 17-6.4-15" |
| • | Power: 90 WATTS per Channel. |
